Flex GG 200 18 Manual Del Usuario página 11

GG 200 18
Safety instructions
WARNING!
Read all safety notices and instructions.
Failure to comply with the safety notices and
instructions may result in electric shock, fire
and/or serious injuries . Keep all safety
notices and instructions in a safe place for
future reference.
CAUTION!
Danger from heat! Beware of burns! The
glue reaches temperatures of up to 200 °C!
Do not use liquid or pasty adhesives!

After skin contact with hot­melt adhesive:

immediately cool with cold water. Do not
try to remove hot­melt adhesive from the
skin. If necessary, seek medical attention.
After eye contact with hot­melt adhesive:

immediately cool for approx. 15 min. with
running water and consult a doctor straight
away.
Do not use in combination with highly

flammable / combustible substances.
Do not use on highly combustible surfaces

or in combus­tible environments (e.g.
paper, textiles etc.).
Make sure heat­sensitive materials are

suitable for gluing with hot­melt adhesive.
Do not pull glue stick out of the applicator.

Hot­melt ad­hesive running into the
applicator may cause damage.
Only use suitable glue sticks at the

intended tempera­ture.
When changing the glue application

temperature, make sure the next glue stick
used is suitable for the temper­ature
selected.
CAUTION!
Danger from water and moisture!
Do not expose the tool to rain.

Do not use tool if it is damp and do not use

it in a damp or wet environment.
This tool may be used by
children aged 8 or above and by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and
knowledge if they are supervised
or have been given instructions
on how to use the tool safely and
understand the hazards
involved.
Do not allow children to play with
the tool. Children must not be
allowed to clean or carry out
maintenance work on the tool
without supervision.
Use only original batteries with the

voltage indicated on the type plate of
your electric device. The use of other
batteries, e.g. imitations, reconditioned
batteries or other makes, increases the
risk of injury and material damage by
exploding batteries.
Safety instructions for handling
batteries
Do not open the battery. Danger of short

circuit.
Protect the battery against heat,

including prolonged sunlight, fire, water
and moisture. Danger of explosion.
A damaged or incorrectly used battery

may result in the emission of fumes.
Ensure a supply of fresh air and consult a
doctor if you feel unwell. The fumes may
irritate the respiratory tracts.
Liquid may leak out of the battery if the

battery is used incorrectly. Avoid contact
with such liquid. In the event of
accidental contact, rinse with water. If
liquid gets into the eyes, seek medical
attention as well. Liquid ejected from the
battery may cause irritation or burns.
Use FLEX rechargeable batteries only in

connection with FLEX tools and FLEX
accessories. Only in this way is the
rechargeable battery protected against
dangerous overloads.
Recharge batteries using only chargers

recommended by the manufacturer. A
charger that is suitable for one type of
battery may create a fire hazard if used
with another battery.
The battery could be damaged by pointed

objects such as nails or screwdrivers or by
force exerted on it externally. This may
give rise to an internal short circuit,
causing the battery to burn, smoke,
explode or overheat.
11