Blumfeldt Versagrow Instrucciones De Montaje página 16

EN
ASSEMBLY
All parts "A" have a at side and a bended
side.
First step is to connect two parts "A" using
the connection method showed before.
Completed x.
Completed shape.
16
Flat side and bended side are used to
connect the parts.
Completed connection.
Add the third part "A" and x using the
same method.
Add reinforcement part "B" in the corners.
For this combination, this is the right way
to connect the parts.
Fix the connection using bolt "E", nut "F"
and a gasket "G".
Add the fourth part "A" and x using the
same method.
Fix the reinforcement with bolts and nuts.