Home Decorators Collection 28240 Guía De Uso Y Cuidados página 5

Installation
1
Installing the mounting bracket
WARNING: Turn off power at the circuit breaker and the
light switch. Ensure the power is off before continuing.
Remove the mounting bracket (AA) from the fixture body
□
(A). Install the mounting bracket (AA) to the outlet box
with the outlet box screw (CC). Make sure the side of
mounting bracket( AA ) marked "GND" must face out.
3
Installing the light fixture
□ Push the wires into the outlet box. Mount the fixture body (A)
onto the mounting bracket (AA), secure with the mounting
screws (BB) and rubber washer (FF). Use weather resistant
caulk (not included) to seal around the top and side
perimeter of the back plate of the fixture body (A). Do not
caulk the bottom of the back plate to allow for condensation
evaporation.
□
Install the light bulb (not included) in the socket of fixture
body (A). Use one Max 60W medium base incandescent bulb
or LED/CFL bulb equivalent.
2
□
Outlet box
AA
CC
BB
5
Connecting the wires
Connect the white wire from the light fixture to the white
supply wire from the outlet box using a connector (EE).
Connect the black wire from the light fixture to the black
supply wire from the outlet box using a connector (EE).
Connect the ground wire from the light fixture to the ground
supply wire from the outlet box using a
the outlet box does not have a ground wire, connect the
copper ground wire from the fixture to the green ground
screw (DD) on the mounting bracket (AA).
EE
AA
AA
FF
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
connector (EE). If
DD
A