Garland BEST 710 DPG-V20 Manual De Instrucciones página 43

cutting area and pay special attention to nails or
pieces of iron that may be around the cutting area.
Be careful also when cutting hardwoods where the
chain can be caught causing the chain to lock and
produce rebound.
• Start cutting at full gas and always keep the
machine at full speed during cutting.
• Cut a single branch or piece of wood at a time.
• Be extremely cautious when introducing the mower
chain into a cut already started to continue.
• Do not make cuts with the mower until you are
familiar with the cutting technique.
• Do not make cuts on branches or pieces of wood
that may change position during cutting or that may
close the cut while it is being practiced.
• Keep the chain in good condition.
• Work only if the chain is well sharpened and
correctly tensioned.
• Never put yourself in the mower's cutting plane.
• Use only spades and replacement chains
specified by the manufacturer. Spare swords and
replacement chains can cause chain breakage and
/ or recoil.
• Follow the manufacturer's instructions regarding
the sharpening and maintenance of the saw chain.
A decrease in the level of depth gauge can lead to
an increase in setbacks.
2.6.2. UNEXPECTED REACTION FORCES WHILE
WORKING WITH THE CUTTERS
When the blades in operation contact a solid object in
the critical area, a dangerous reaction can occur. This
reaction is called backsliding. As a result, the operator
may lose control of the hedge trimmer and serious or
fatal injuries may occur.
These reaction forces result from misuse of the tool
and / or improper operating procedures or conditions
and can be avoided by taking the appropriate
precautions specified below:
1. There should be no fences, posts, cables or
rocks near the blades to prevent recoil, as well as
possible damage to the blades in question.
2. During use of the hedge trimmer, you should only
grab the handles.
3. Also, in no case should you lose eye contact with
the hedge trimmer. If necessary, place the throttle
in the idle position.
4. When using the hedge trimmer, you should not
leave it near your feet, nor should it exceed the
level of your shoulders.
2.7. SERVICE
Have your machine checked periodically by a qualified
repair service using only identical replacement parts.
This will ensure that the safety of this machine is
maintained.
43/174
English