Publicidad
• Assembly:
Before operation please fix the frame and make sure the crank can be
turned freely。
Lubricate the washer with edible oil and insert it on the screw shaft from the
small end。
Insert screw shaft in the press cage。
Screw on press cage cap and screw on terminal adjustment bolt。
Attach the crank arm to the screw shaft and tighten the bolt。
Fill 80% fuel into the lamp bottle (kerosene or alcohol). pass a 15cm wick
through the washer。
Leave 0.5cm of wick outside and put the longer end in the fuel bottle—
place the was her at the bottle mouth。
Place the lamp under the press cage. Secure the light with a rubber band.
- 3 -
Publicidad
