Jöllenbeck Powerstixx 5.1 Manual De Instrucciones página 12

8. Press the On/Standby button on the remote control to switch the
D
system on.
GB LED: The LED on the front of the subwoofer will light blue, indicating
that the device is on.
F
Note: Since each sound card has a different design, the manual cannot
give detailed information on how to connect to 5.1 sound cards. More
E
information is available from the technical documentation for your sound
card or from the sound card manufacturer.
I
3. Functions
Button:
On/Standby:
Input
Master (-/+):
Sub
Power On/Off
(Subwoofer)
Function:
Switches the system
to standby or active
mode. The system
is not completely
disconnected from
the power supply in
this mode!
Changes between
2 connected sound
sources (to "5.1"
and "2.1").
Controls the overall
volume of the system
Controls the bass
sound of the subwoo-
fer
Power switch to
completely switch off
the system
LED display
The LED lights blue or red in
active mode depending on the
chosen sound source. If the
system is put in standby mode
(LED goes out) and re-activated,
the last chosen sound source is
always active.
Blue LED: The input of the 5.1
sound source is active (default).
Red LED: The input of the 2.1
sound source is active.
Depending on the selected
sound source (5.1 or 2.1), the
LED flashes blue or red when
the volume is altered.
Depending on the selected
sound source (5.1 or 2.1), the
LED flashes blue or red when
the bass is altered.
After switching the system
off and then on again, 5.1 is
activated. The LED flashes blue
several times and goes out.
12