SEA FLEX UNI PG Manual Del Usuario página 7

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
FLEX UNI PG
TWO-CHANNEL PLUG IN RECEIVER
Freq. 433.920 MHz (Cod. 23120431)
Freq. 868.300 MHz (Cod. 23120432)
Generalities
The 433.920 Mhz/868.350MHz receiver module (RX) is compatible with all SEA transmitters.
Module Receiver Package
Content:
- Electronic circuit
- Plastic container
- Instructions
- Accessories for installation
Jumper selection
Radiocontrol learning on Channel 1 - (Fig.1)
- Push P1 button to have access to the Programming modality
- CH1 led will switch on
- Push the selected button on the transmitter
- CH1 led will flash twice to confirm the memorization and it
will stay switch on until it will receive a new code (other transmitter).
- Memorize other radiocontrols or push P1 twice to exit
from the Programming modality.
Attention: the first stored radio transmitter will set the receiver in Roll Standard (TX STANDARD) or Roll Plus (TX
PLUS) or FIX CODE mode. It is not possible to use different TX types with the same receiver.
Radiocontrol learning on Channel 2 - (Fig.2)
- Push P1 button twice to have access to the Programming modality
- CH2 led will switch on
- Push the selected button on the transmitter
- CH2 led will flash twice to confirm the memorization and it
will stay switch on until it will receive a new code (other transmitter).
- Memorize other radiocontrols or push P1 twice to exit from
the Programming modality.
Attention: the first stored radio transmitter will set the receiver in Roll Standard (TX STANDARD) or Roll Plus (TX
PLUS) or FIX CODE mode. It is not possible to use different TX types with the same receiver.
Notice
- By using DIP SWITCH radiocontrols programmed with the same codes it is sufficient to memorize only one
transmitter.
67410696
® SEA S.p.A.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. +39 0861 588341 r.a. Fax +39 0861 588344
1
CN1
+
12/24V
Power Supply Selection
J1 Connected = 12V /
J1 Opened = 24V /
English
TWO-CHANNEL PLUG IN RECEIVER
Freq. 433.920 MHz (Code 23120433)
Freq. 868.300 MHz (Code 23120434)
Technical Specifications
Power supply:
Absorption:
Receiving frequency :
Sensitivity:
Code:
Number of codes which
can be memorized:
Number of channels:
2
CH1 Output:
CH2 Output:
Working temperature:
Storage temperature:
Dimensions:
Humidity:
2 3 4 5
N.O. Com.
-
N.C.
CH1 CH1
CH2
~ ~ /
~ J2 Connected = CH2 2 min. timed
J2 Not inserted = CH2 not timed
~
Rev. 04 - 02/2016
http://www.seateam.com
e-mail:seacom@seateam.com
FLEX UNI
12/24 ~ /
15mA without working
433.920Mhz or 868.300Mhz
-100 dB
72 bit digital (Roll Plus) /
12 bit (Transmitter with fixed code)
800 (Roll Plus),
30 (other transmitters)
2
N.O. Free Contact
N.O./N.C. Free Contact
-15°C / +60°C
-40°C / +80°C
46 x 65 mm
from 5% to 90% no condensation
6 7
Com.
N.O.
CH2 CH2
Timer
LED CH1
P1
Once
LED CH2
P1
Twice
1 2
-
Fig.1
Fig.2
7