Publicidad
Idiomas disponibles
Idiomas disponibles
POP-UP DRAIN INSTRUCTIONS
3. From underneath the sink, screw the bottom gasket
(3) and nut (4) assembly onto the pop-up body (2) by
twisting clockwise until secure.
OPERATION INSTRUCTIONS
1. Flushing and checking for leaks：
Important: After installation is complete, remove
the aerator (1) from the faucet with a coin to flush the
water lines. Turn on the water supply and allow both
hot and cold water to run for at least one minute each.
This flushes away any debris that could cause damage
to internal parts. While the water is running, check for
leaks. Turn off the water and replace the aerator.
3
1
1
6
2
3
4
Publicidad
