Bluetti AC240P Manual Del Usuario página 25

11. Parallel Operation
To increase your power output, you can connect two AC240P units in parallel. When
connected in this way, the two units can deliver up to 4,800W of power. To connect them,
please follow these steps:
1. Make sure both AC240P units are turned off.
2. Connect them using the parallel box.
3. Power on one AC240P unit, and the other unit will automatically turn on.
When you connect your parallel system to a wall outlet, your devices will get power from
either the grid or the system, depending on their power demand. If the demand is lower
than 4,000W, they'll get power directly from the grid. But if the demand is between
4,000W-4,800W, they'll draw from the system.
Note:
•
All the settings made on one AC240P unit will be synchronized to the other unit.
If you need to adjust the Max. Grid Input Current, please use the BLUETTI App and make
the necessary changes.
•
Charge the two AC240Ps using the Parallel Charging Cable(with parallel box in Optional
Accessories） in parallel mode.
25
JUST POWER ON