Descargar Imprimir esta página

LG OLED77Z3PSA Manual Del Usuario página 8

Ocultar thumbs Ver también para OLED77Z3PSA:

Publicidad

Idiomas disponibles

Idiomas disponibles

Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the
following. The illustrations may differ from the actual items and an RF cable
is optional.
Copper wire
Turning on the TV
You can simply operate the TV functions, using the button.
8
• Make sure not to bend the copper wire of the RF cable.
• Complete all connections between devices, and then connect the power
cord to the power outlet to prevent damage to your TV.
• To improve the picture quality in a poor signal area, purchase a signal
amplifier.
• Use a signal splitter to use 2 TVs or more.
• If the antenna is not installed properly, contact your dealer for assistance.
• This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly
because the related standards have not been confirmed. (Depending
upon country)
Starting TV
1) All running apps will close, and any recording in progress will stop.
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.
Note
• When the TV is turned on for the first time after being shipped from the
factory, initialization of the TV may take approximately one minute.
• Your TV's OSD (On Screen Display) may differ slightly from that shown
in this manual.
• The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
Power On (Press)
Power Off
(Press and Hold)
1)
Menu Control (Press
)
2)
Menu Selection (Press and Hold
3)
)

Publicidad

loading

Este manual también es adecuado para:

Oled55g3psaOled65g3psaOled77g3psaOled77g3psa.awm