Publicidad
Idiomas disponibles
Idiomas disponibles
5. USING THE PRODUCT
EN
5.1. CHARGING
1.
Turn off the appliance and detach the crevice, dusting or floor nozzle from the main unit.
2.
Place the main unit on the charging station by inserting the suction tube into the base. Make
sure the back, not the front, of the main unit is in contact with the support.
3.
Plug the battery charger into a suitable electrical socket. Charging will start automatically.
During charging the battery indicator blinks and the LCD screen shows the current battery level
in percent in real time.
4.
When the battery is fully charged, the LCD screen shows 100 and turn off after about
10 minutes. If you don't need to recharge the battery soon, unplug the battery charger.
5.2. TURNING THE APPLIANCE ON/OF
To turn the appliance on or off, press the On/Off button.
operating and displays the current battery level on the screen. Once turned off, the appliance
turns off the screen.
5.3. ADJUSTING THE SUCTION POWER
•
The appliance offers 2 suction power levels: Low and High. The appliance always sets the
power level to Low when you turn it on.
•
You can adjust the suction power to suit the type of surface being cleaned. Reducing the
suction power reduces the amount of effort required to move the floor brush or nozzle and
extends the battery life.
To switch between the suction power levels, press the suction power button. The appliance
changes the suction power gradually. When the power increases, the suction power indicator
gradually turns red. When the power decreases, the suction power indicator gradually turns green.
6. MAINTENANCE AND CLEANING
Note: Always switch off and disconnect the appliance from the power supply (if charging) before
changing accessories, cleaning or maintenance.
6.1. CLEANING THE APPLIANCE AND ACCESSORIES
Use a soft damp cloth to wipe off any dirt from the main body, tube and accessories. Pay attention
to not allow water to get inside the appliance. Let them dry completely before use.
6.2. EMPTYING THE DUST CONTAINER
Empty the dust container in a timely manner – don't overfill the dust
container. Using your machine with too much dirt in the dust container
may affect the performance and require more frequent filter washing.
1.
Hold the machine over a dustbin and let the suction nozzle opening
faces the dustbin opening.
2.
Press the suction nozzle release button to detach the nozzle and
empty the dust container.
3.
Push the dust container upwards until it clicks into place to replace it.
6.3. REMOVING AND REPLACING THE DUST CONTAINER
•
To remove the dust container, turn the dust container clockwise until
the arrow symbol points to the unlocked symbol on the main body.
Then pull off the dust container.
Once turned on, the appliance starts
10
Publicidad
