Proline CH1802S Manual De Instrucciones página 27

Overheat safety protection
Your heater is fitted with a safety device to switches off the heater in the event
of overheating.
Should the overheat protection be triggered, switch off and unplug the heater
from the mains socket. Let the heater completely cool and inspect for blocakge
of air inlet or outlet. Then plug in and press the power switch again and operate
as normal.
If the heater fails to operate or the safety device switches the heater off again,
return heater to your nearest service center for examination or repair.
Safety Tip-over switch
The heater is fitted with a safety tip-over switch. If the heater is knocked over,
the power to the heater will shut off automatically.
48
CLEANING AND MAINTENANCE
It is recommended to regularly clean the heater to ensure trouble-
free operation.
• Before cleaning the heater, switch off and unplug it from the
mains socket. Allow it to completely cool.
• Wipe the exterior of the heater with a slightly damp cloth. Allow
it to dry before reconnecting it to the power supply.
• Do not use abrasive or chemical cleaning agents.
• Do not immerse the heater in water or any other liquid. Do not
allow water to enter the heater.
• If necessary, remove dust and fluff accumulated inside the
heater by running a vacuum cleaner nozzle over the guards.
SPECIFICATIONS
Ratings : 220-240 V~ 50-60 Hz
1800 W
49