Publicidad
Idiomas disponibles
Idiomas disponibles
3) Connect and switch on the digital photo frame
Please note:
-
The plug must be placed next to the device so to be easily accessible.
-
Do not open the box of the line adapter. If the box is open, there is danger of life caused by electric shock. The product does
not contain parts to be maintained.
-
Actuate the line adapter only with earthed plugs of AC 100-240V~, 50/60 Hz. If you are not sure about the provision of
electricity at the installation point, ask your energy provider.
-
Use the included line adapter and line connection cable KUANTEN KT05W050120EUD only.
-
To interrupt the power supply of your equipment, unplug the adapter. While you are unplugging it, always hold the adapter. Do
never pull the cable.
4)
Insert memory cards | connect USB data carriers
Connect the Power Adapter supplied with the frame (DC-
IN). Plug the other end of the Adapter into the Socket. The
photo frame will now start automatically. Hold down the
Power button briefly to turn it off or on again.
Insert memory cards into the card reader slot with the logo
facing away from the display.
Caution: Please do not insert card with force!
The following memory card formats can be used with your digital photo frame:
•
Secure Digital Card (SD™)
Secure Digital High Capacity (SDHC™)
•
Secure Digital Extended Capacity (SDXC™)
•
USB data carriers can only be plugged into the USB slot in
one direction.
Please note: Never insert USB data carriers
by use of force!
EN - 3
Publicidad
