Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical Heating Blanket CF-201
•
Allow the blanket to dry naturally.
WARNING
•
Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
•
Do not wring out the blanket
•
Do not dry using a tumble dryer
•
Do not iron the blanket
•
Do not dry clean.
•
Don't connect the blanket to power supply to dry it.
•
Don't dry it in the sun or iron it, which will cause safety problems because of the aging of the insulating layer.
•
Do not use an appliance such as a hair dryer to dry it
•
Do not submerse the controller in water or get it all wet.
11
Maintenance & storage
Store the heating blanket only if it is dry.
The dry electric heating blanket should be folded without any crease. Don't place it under quilt or other things in order to avoid any pressure.
WARNING
•
Don't use any mothproofing agent like naphthalene, which will damage the insulation material.
•
Do not try to repair a fuse link or thermal link. The appliance must be returned to the manufacturer or his agent if the link has
ruptured.
•
Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been misused, return
it to the supplier prior to any further use.
•
Avoid creasing the appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
12
Disposal of the device (environment)
At the end of the device lifecycle, you should not throw this device into the normal household garbage but bring the device to
a collection point for the recycling of electrical and electronic equipments. The symbol on the device, user guide and/or box
indicate this.
Some of the device materials can be re-used if you bring them to a recycling point. By re-using some parts or raw materials
from used devices you make an important contribution to the protection of the environment. Please contact your local
authorities in case you need more information on the collection points in your area.
13
Topcom warranty
13.1
Warranty period
The devices have a 24-month warranty period. The warranty period starts on the day the new unit is purchased.
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven
by presentation of the original or copy of the purchase receipt, on which the date of purchase and the unit-model are indicated.
13.2
Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories are not
covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during
transportation.
No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.
Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer.
This device is in compliance with the essential requirements and other relevant provisions of the directive
2004/108/EC. The Declaration of conformity can be found on:
www.tristar.eu
All manuals and user guides at all-guides.com
6
Publicidad
