Globestock SENTRY Instrucciones Para El Usuario página 13

6. INSTRUCTIONS FOR USE
6.1. ANCHORAGE CONNECTORS
• Any anchorage connector's (e.g. carabiner's) used in conjunction with the the SENTRY tripod must must
conform to all national standards and regulations applicable.
• The SENTRY tripod can be used in conjunction with anchorage connectors which conform to any of the
following standards;
!
6.2. ATTACHING A USER
• The SENTRY tripod can only be used in conjunction with a full-body harness which conforms to all national
standards and regulations applicable.
• The SENTRY tripod can only be used with full-body harnesses which conform to;
6.3. MAINTENANCE, STORAGE & TRANSPORTATION
• This equipment must be stored in a manner as to preclude damage from environmental factors such as heat,
light, excessive moisture, oil, chemicals and their vapours, or other degrading elements.
• This equipment may be cleaned using warm water and a mild detergent. Ensure the equipment is completely
dry before storing.
• Remove any accessories, brackets, or other equipment prior to transporting the tripod.
• The tripod must be folded (legs in shortest configuration and the head pin removed and the heads folded in on
each other) prior to transportation.
• Use a suitable bag or box to prevent damage when transporting the tripod. Globestock recommends using the
GSETB230 Wheeled Tripod Bag for transporting the tripod.
i. EN 362; or
ii. ANSI/ASSP Z359
iii. CSA Z259
Only anchorage connectors which conform to EN 362 or ANSI/ASSP Z359 or CSA Z259 can
be used with this product.
IMPROPER USE MAY RESULT IN SERIOUS INJURY OR DEATH.
i. EN 361; or
ii. ANSI/ASSP Z359
iii. CSA Z259
WARNING
13
EN