Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
MOUNTING CHEST ON CABINET
Items Needed:
Chest
Cabinet
Process:
• Empty contents of the chest.
• Place the chest on the top of the cabinet (use adequate
personnal for this operation).
OPERATION
NOTE: Not all operation instructions will relate to your model.
LOCKING AND UNLOCKING THE UNIT
Locking the Unit:
• Make sure drawers are fully closed.
• Insert the key and turn fully to the left.
• Remove key.
Unlocking the Unit:
• Insert the key and turn fully to the right.
• Remove key.
REMOVING DRAWERS
• Empty the drawer.
• Fully extend the drawer.
Lever Style - Lift or lower (depending on the slide) the
release lever on both sides, (this allows the slides to ride
over the stops.) Pull out to remove.
Tab Style - Depress the release tabs on both sides,
(this allows the slides to ride over the stops.)
Pull out to remove.
Friction Style - Fully extend the drawer. Insert screwdriver
into the slot in the side and push in on the stop until it
clears the lance. Pull drawer just past lance before
releasing stop. Repeat the process for the other slide.
Release
2
Publicidad
