Powermat PMR-BBB1 Manuel Du Propriétaire página 6

Aligning a Device
Aligning your Powermat enabled devices for optimal charging is
simple with Powermat.
Feel. When you place a device on a Powermat Mat you will feel a
slight magnetic attraction when the device gets close to a Power
Access Point. The pull will guide the device into perfect position
for optimal charging.
Hear. The Powermat activation sound will be played when a device
is properly positioned and charging begins. The deactivation sound
will be played when the device is removed from the Power Access
Point. The level of these sounds can be controlled by the volume
button on the Powermat Mat (Off / High / Low).
NOTE: See the Mat manual for the location of this button.
See. Each Power Access Point has a corresponding light indicator
that will illuminate when a device is properly positioned and charging
begins. The light will turn off when the device is removed from the
Power Access Point. The brightness of these lights can be controlled
by the light button on the Powermat Mat (Off / High / Low).
NOTE: See the Mat manual for the location of this button.
9
The Powermat "Handshake"
When a Powermat enabled device is properly positioned on a
Powermat Mat, an automatic "handshake" process will take place
during which the Powermat Mat will recognize the Powermat
Receiver and activate the Powermat Access Point. (NOTE: Non-
enabled devices will not cause activation.) This process ensures
that the proper power is given to the BlackBerry Bold. Also, this
communication allows the mat to stop delivering power when the
device is fully charged. This energy efficient process is unique to
every access point on the mat, meaning that the mat will address
the charging needs of each device independently. The mat will
also stop charging each device as soon as that device is fully
charged while continuing to charge all remaining devices.
NOTE: The light may come on and go off after approximately
fifteen (15) seconds if the mat confirms that a device is fully
charged.
PRODUCT SPECIFICATIONS
• Operational Temperature 32° – 104°F (0° - 40°C)
• Humidity Range 0% - 90% non condensing
• Use only with certified Powermat charging surfaces
10