Red Kite Push Me Astro Folleto De Instrucciones página 5

UK
ASSEMBLY AND USAGE
1. To open the chassis
a. Open the frame by pressing in the small button on the handle, keep it held in and then squeeze the large trigger on the handle.
b. Lift upwards in a smooth movement until the frame locks in place.
c. Complete.
WARNING Ensure that all the locking devices are engaged before use.
2. To attach the wheels
a. Insert the metal stems of the front wheels into the space on the bottom of the front wheel holders and push upwards until they click
in place.
b. Insert the metal stems of the rear wheels into the space on the rear axle/brake unit and push inwards until it clicks in place.
3. To attach the bumper bar
a. Insert the ends of the bumper bar into the brackets until they click in place.
b. The bar can be removed by pressing in the small buttons and pulling the bar out.
4. To operate the steering locks
To select a fixed or swivel front wheel, slide the lever to the side.
5. To adjust the calf support
a. To adjust the calf rest, press in the buttons on both sides and swivel the end of the seat to the required position.
b. The calf rest can be raised and lowered.
6. To operate the brake
a. Press down on the brake pedal to engage the brakes.
b. Push forward on the pedal to release the brakes.
WARNING Apply all the brakes whenever you park the stroller.
7. To adjust the seat
a. To raise the seat, hold the end of the strap and pull upwards to the required position.
b. To recline the seat, squeeze the trigger on the back of the seat unit and pull backwards to the desired position.
8. To fold the stroller
8a. Retract the hood and raise the seat unit to the upright position.
8b. Engage the brakes. Push forward on the handle slightly to ensure the brakes are fully engaged.
8c. Press in the small button on the handle, keep it held in and then squeeze the large trigger on the handle.
8d. As soon as the frame starts to fold, push forwards slightly and the stroller will completely fold and lock together.
9. To unfold the stroller
a. Open the stroller by pressing in the small button on the handle, keep in held in and then squeeze the large trigger on the handle.
b. Lift upwards in a smooth movement until the frame locks in place.
c. Complete.
10. To secure and adjust the harness
a. First release the harness by pressing firmly on the centre button.
b. After placing the child in the seat, slot together both straps and push into the central buckle.
c. Use the sliders to adjust as necessary.
10d. Ensure you choose the correct harness strap position according to the age of your child.
10e. To select a different position, undo the Velcro flap on the back of the seat, slide your hand inside the cover and thread the buckle
end of the strap through the slot in the hard seat back. Reposition the strap and ensure you turn the buckle so it sits flat against the
hard seat back.
WARNING! For babies aged 0 - 6 months the harness must be fed through the lowest holes to
prevent risk of strangulation.
WARNING Always use the crotch strap in combination with the waist belt.
.
11. To attach the raincover
Place the rain cover over the top of the pram and secure it to the frame with the Velcro tabs. (Not shown).