Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not subject cells or batteries to mechanical shock.
• Do not mix cells of different manufacture, capacity, size or type within a
product.
• Only use the battery type(s) recommended in this document.
• Keep cells and batteries clean and dry.
• Do not expose cells or batteries to heat or fire. Avoid storage in direct
sunlight.
• In the event of a cell leaking, do not allow the liquid to come in contact with
the skin or eyes. If contact has been made, wash the affected area with
copious amounts of water and seek medical advice.
• Do not use any cell or battery that is not designed for use with the product.
• Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
• Battery usage by children should be supervised.
• Dispose of the cell or battery properly.
• Seek medical advice immediately if a cell or a battery has been swallowed.
• Disconnect the product from the electrical outlet and other equipment if
problems occur.
• Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that
can damage the surface.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the product.
• Only use the provided USB cable.
• Consult the local laws and regulations for this product before installing and
using.
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
• Before first use charge the camera for 8 hours, even if the camera says it is
already fully charged.
Preparing the security camera
1. Open the main lid A
2. Insert a microSD card (not included) into the microSD card slot A
3. Plug the USB cable A
For watertight charging:
4
• Open A
.
8
• Push the USB lid A
• Insert A
through the opening in A
6
• Close A
8
.
8
.
into the USB port A
6
out of A
9
8
.
r
.
into A
.
8
r
6
e
.
Publicidad
