ENERGIZER SOLAR PEAK 1800
LCD Screen
Remaining
battery percentage
Remaining charge/
discharge time
Over temperature warning
Battery capacity: When the power station is being charged, the SOC icon will flicker.
Wi-Fi connection status: The flickering icon indicates that power station is ready for pairing. The icon will keep flickering if
a mobile phone and power station are connected by hotspot. After network connection succeeds, the icon will always be
on. If connection fails, the icon will be off.
* Please refer to Error Messages & Solutions for more details regarding error messages.
How to Use
Note: Long press the ON/OFF button to restart the BMS and clear the fault information.
On and Off
•
Press the main power switch to turn on the device, then the screen will be lit and the main power indicator will enter
the slowly blinking light mode.
•
If no operation is performed to the power station for 5 minutes, the power station will enter hibernation state and
the LCD will automatically turn off. When there is load change or operation to the power station, the LCD screen will
illuminate automatically. Press the main power switch to turn on or turn off the LCD.
•
Press and hold the main power switch to toggle the LCD on or off.
•
In the normal mode (the power is above 5%), the default standby time of this product is 2 hours; when the AC
output switch is not turned on, and there is no charge or discharge for 2 hours, the product will automatically shut
down, and the standby time can be set it on the Energizer Solar Portable Power App; when the power is 5% or
below, the product will be forced to enter the low power mode. In the case of no charge or discharge, the product
will adjust the standby time according to the power and automatically shut down.
PV charge
Low temperature warning
USB-A output
DC output
Slow charge
Quick charge
Car charge
AC output
USB-C output
Wi-Fi connection status
8
Fan status
Overload
Input power
Bluetooth
Output power
Error code
Short press to turn on
Long press to turn off
ENGLISH