Publicidad
(English)
Notes:
Do not look directly at or illuminate by means of an instrument (telescope)!
1.
Do not remove the baffle on the lens guard and avoid exposure to the eyes!
2.
Please work with professional staff when it needed disassembled, adjusted or repaired!
3.
Do not disassemble, impact, squeeze, or put into fire or water. If there is a serious bulging, please
4.
do not continue to use. Do not put it in high temperature!
Reading Skills
In order to obtain good reading effect,the target beam projected by the
viewfindershall aim at the center of the barcode as shown below.
The closer to the barcode, The beam becomes smaller farther away from the barcode, The
beam becomes larger. If the bar code is small, the scanner should be close to the barcode. If the
barcode is larger, the scanner should be further away from the barcode, making it easier to read
the barcode correctly.
If the barcode is high in reflectance (for example, coated), you may need to tilt the scanner at an
Angle to successfully scan the barcode.
Cable removal
1. Find the cable removal hole which is under the scanner.
2. Insert a pin into the hole and press the paper clip to pull the cable from the
bar code scanner.
Simple-maintain
1. The stains and dust on the scan window will be affect the scanner's working. When cleaning,
you should use good quality facial tissue to wipe gently. Then blow it clean with a blown
balloon. If you use poor paper to clean for a long time, it will damage the surface of the
scanning window and affect the reading effect of the scanner.
The casing of the scanner can be wiped with a clean soft cloth. If needed, use a little
detergent to add water and rub it with a soft cloth.
Publicidad
