Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing the remote control with the toilet
For the first time
Insert 2 AAA batteries in the remote control.
Press the
power button on the
backside of the remote control for
more than 2 seconds; the remote
control is turned on (LED facing
outward).
Precautions when using Bluetooth
Keep the shower toilet and remote control away from devices that emit radio waves.
Keep the shower toilet and remote control as far away as possible from the following devices to prevent adverse effect caused by radio wave
interference:
• Microwaves / Wi-Fi devices / Bluetooth compatible devices other than smartphones
• Near other devices that emit radio waves in the 2.4 GHz bandwidth (digital cordless telephones, wireless audio devices, game consoles, PC
peripheral devices, etc.)
• If you are wearing an implantable cardioverter defibrillator (cardiac pacemaker), keep the remote controller at least 22 cm away from the implant.
* Please do not pair more than 1 set of remote control and toilet at same time.
19
GB
00:00:00
00:00:02
Bring the remote control close to the
product body; press and hold the
"stop" button for more than 3s.
00:00:03
After pairing is completed, all LEDs on
remote control will flash 3 times at the
same time.
If pairing fails, the middle LED of the
remote flashes 3 times.
If the pairing fails, please repeat the steps.
Make sure the product is turned on.
Once you completed the pairing, there is no need for
a new initial setup the next time.
00:01:00
Publicidad
