Publicidad
Idiomas disponibles
Idiomas disponibles
7. Put the refrigerating door on the middle hinge , install the upper hinge, hinge cover and hole cap .
hole cap
2.4 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
2.5 Starting to use
595 mm
991mm
2.6 Energy saving tips
● T he appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
● L et hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, or spoil.
● B e sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
● A ppliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
● O rganize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
● B efore initial start, keep the refrigerator still for half an hour
before connecting it to power supply.
● B efore putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
● S pare enough space for convenient opening of the doors and drawers or
statement by the distributor.
(The picture above is only for reference. The actual
configuration will depend on the physical product
or statement by the distributor)
2. Remove the lampshade with
a screwdriver.
4. Remove the connection
terminal.
25
hinge cover
upper hinge
Publicidad
