Xblitz Night 2 Manual Del Usuario página 15

the frame. Make sure the camera will not obstruct the driver's view
while driving.
2. Mount the bracket on the windscreen and then install the dash cam
with a formatted micro SD memory card in it.
3. Route the USB power cable so that it does not obstruct the view
while driving.
4. Plug the power cord into the device and the power supply plug into
the car's cigarette lighter socket.
05. MAIN FEATURES OF THE CAMERA
1. Camera modes
The camera has 2 modes of operation. Recording mode: in this
mode the camera records video and Playback mode: viewing footage
recorded by the camera.
2. Loop recording
The camera divides the recordings according to the selected time.
When the memory card fills up, the oldest (unprotected) recording
is overwritten.
3. Resolution
The camera can record in different resolutions. The higher the
resolution the better the quality of the recordings, but the recording
files also take up more space on the memory card, it is recommended
to use the highest resolution.
4. G-Sensor
Gravity sensor. When the sensor is activated on impact, the recording
file is protected from being overwritten. It is recommended that the
lowest available value is set, as at a higher value the camera may pick
up bumps caused by unevenness of the road, which can cause the
memory card to fill up.
5. Audio recording
Along with video recording, the camera can also record audio.
6. Motion detection
The camera has a motion detection mode that automatically starts
a short audio/video recording when a moving object (e.g. a person
approaching the car) is detected. To avoid unnecessary clogging of
the memory card in the device, only activate the motion detection
mode when you leave the car parked.
7. Night mode
Enhanced light sensitivity and image conversion to black and white
make route footage clearer.
8. Parking mode
15