Acer 3 Serie Manual Del Usuario página 5

* Max Speed in speed mode 3 and speed mode 4 depend on countries
regulations.
Speed display: Show the current vehicle speed; display the error code
in case of vehicle failure.
(Series 3/Series 5)
Error display: When the icon is lit, the speed section indicates the error
code. Please get in touch with the dealer for a repair inspection.
(Series 3/Series 5)
Battery display: about 20% per grid.
(Series 3/Series 5)
Front/Rear light display: When illuminated, the front and rear lights will
turn on.
(Series 3/Series 5)
Bluetooth display: Bluetooth icon stays on, indicating the device is
connected.
(Series 5)
Cruising control display: The cruising control is on when the light
flashes. Press and hold the accelerator for about 7 seconds to enter
cruise mode during which the cruise control display light stays on
continuously.
(Series 5)
VI. Starting the scooter
1. Press and hold the start button for 3 seconds. To turn on the power;
the display screen lights up (after starting up, quickly press the
start button twice in a row to switch between high and low speeds.
Press the button three times in a row to switch between metric and
imperial units.)
2. Hold the handle tightly with both hands and look straight ahead,
place one foot on the deck and use the other foot to assist on the
ground to slide the vehicle forward.
3. Slowly press the accelerator aftersliding the vehicle. When the motor
starts, place both feet on the deck.
Turning Light switch
F
2
EN-4
Front/Rear Light Switch
1
Start/Function Button
3
Accelerator throttle