Okoru Global CHEST 720L Manual De Instrucciones página 4

EN
USER´S MANUAL
Before we begin...
We want to thank you for choosing one of our products. The assembly
process may require a little patience and time, but don't worry, we are
here to encourage you!
Once you are finished think of the satisfaction and pride you will feel when you see your finished work and know that you
have done it yourself. Also, by assembling it you are making a contribution to the environment. How? As it is not delivered
fully assembled, less packaging is used, which means less waste and less waste. In this way each product takes up less
space and therefore you make the most of the means of transport, thus reducing CO
Therefore, with this purchase you are making a conscious choice to protect our planet.
So, go ahead and get to work!
RECOMMENDATIONS PRIOR TO ASSEMBLY
The product is not designed to be installed directly on the lawn. We recommend mounting on a level and firm wooden
base, a flat concrete floor or cemented bricks or blocks.
If a concrete pad is made it is important that it is sloped towards the edges to prevent water ingress.
It is very important to fix the product to the floor. It does not include screws or other parts necessary for anchoring.
MAINTENANCE
The roof must be kept free of debris, as the weight on top can damage your product.
Do not store chemical, combustible and/or corrosive products inside.
WARRANTY
This product is manufactured with the best materials and under strict quality controls and standards. If you detect any
problem with the product you have purchased, please contact our customer service department at the telephone number
and email address given on the back cover of this instruction manual.
The warranty is valid from the date of purchase that appears on the receipt or invoice, which must be presented in order
to make use of the warranty.
The warranty period for this product is 10 years against any inconvenience or failure resulting from structural defect or
discolouration.
EXCLUDED FROM THE WARRANTY
There are certain causes which are excluded from the guarantee, such as:
�� there is a transport non-conformity, the transport agency must be notified within 24 hours of delivery.
�� Breakage or damage caused by inclement weather.
�� Incorrect assembly, incorrect use and the consequences of this.
In addition, you can consult the complete list of these three by scanning the QR on the box.
TOOLS REQUIRED
FOR ASSEMBLY
04
Two people are required
to assemble the product
emissions.
2
The average assembly time can be
between 2 hours for the smaller models
and 10-12 hours for the larger ones