Sharp GX-BT390 Manual De Funcionamiento página 15

General control (continued)
■ TWS - Dual speaker mode
Two units of GX-BT390 can wirelessly
play music in stereo.
1.
Power on both units and make
sure none of the unit has Bluetooth
connection.
2.
Press the
unit, the two speakers will connect
automatically. The blue LED blinks on
one unit and stays on the other one.
3.
Search Bluetooth device and select
"GX-BT390 SHARP".
4.
When the device and the units are
connected, the blue LED of both
units will stay on.
5.
Press and hold the
disconnect the TWS connection.
Note:
Once connected for dual pairing, two
speakers will re-connect TWS again
automatically when the power is turned
on.
In TWS mode, only the master speaker
supports the phone call function.
GX-BT390_IM_US_EN.indd 14 GX-BT390_IM_US_EN.indd 14
button on one of the
buttons to
■ Hands-free function
When the smartphone is connected to
the speaker, follow the steps below to
take hands-free calls on the speaker:
1.
Press the
call;
2.
Press the
the call;
3.
During a call, press
hang up the call.
■ Aux-In mode
Plug in the supplied 3.5 mm cable
into the speaker. The other end is
connected to your device. LED will stay
illuminated.
1.
Press the
volume.
2.
Press the
volume.
3.
Press to mute speaker.
E-14
button to pick up the
button twice to reject
button to
button to increase the
button to decrease the
7/25/23 1:37 PM 7/25/23 1:37 PM