Panasonic WV-CF294 Instrucciones De Operación página 15

<Adjustment for WV-CF294 >
q Loosen the zoom lock lever and move
the lever between TELE and WIDE to
obtain the appropriate angle of view.
Tighten the zoom lock lever.
w Move the focus lever between FAR and
NEAR to make coarse adjustment to the
focus.
Note: To change the angle of view by
moving the zoom lock lever, also
move the focus lever to adjust the
focus.
e Press the AF switch on the side of the
camera.
The LED for AF lights up for approx. 10
sec. and the focus is automatically
adjusted.
Notes:
• The ABF function does not cover the full
focus range. Be sure to perform coarse
adjustments to the angle of view and
focus manually, and then press the AF
switch to activate the ABF function.
• Do not touch the lens while the LED for
AF stays alight. Failure to observe this
may cause trouble.
• The AF switch may not initially adjust the
focus. In such a case, widen the aperture
by pointing the camera at a dark subject.
• The AF switch may not adjust the focus
resulting in the LED for AF blinking. For
the following subjects, select ELC with
the light control mode selector and
adjust the focus manually.
• Quickly moving subjects
• Subjects with remarkable illuminance
change
• Subjects with low illuminance (e.g.
headlights)
• Subjects which are extremely bright
or reflective
• Subjects behind a window
• Subjects with little contrast between
light and dark (e.g. white walls)
• Subjects with
depth
• Subjects which flicker
• Subjects with lateral parallel lines
(e.g. shutters)
All manuals and user guides at all-guides.com
extensive greater
• A foggy or dirty dome cover
r Focus adjustment is available by press-
ing the AF switch with a pointed item,
such as a ballpoint pen, even after
mounting the dome cover. In such a
case, the direction of the camera and the
presence of the object should be
checked beforehand because a visual
check is not available on the monitor.
Notes:
• Before mounting the top cover, make
sure that the subject is present.
• Before pressing the AF switch, make
sure that the marker is adjusted to the
"LOCK" position.
• Be aware that zoom adjustment and
coarse focus adjustment should be per-
formed beforehand to obtain precise
focus.
• Auto focus adjustment is available only
when the AF switch is pressed for WV-
CF294.
Press the AF switch with a pointed item such as
a ballpoint pen.
"LOCK" position
15