Orbegozo LV 3450 Manual De Instrucciones página 20

LV 3450
Cleaning the floor boards
You can put the long sprayer (11), the hose (15) or just use the fixed sprayer (13). Then install the
bended sprayer (6). Aim the sprayer at the floor board, and press down the steam button to remove
the dirt and stains from the wall corners and the floor.
PARTS INSTALLATION
Long sprayer installation / Hose installation
Line up the arrow of the sprayer/hose with
the upper part of the fixed sprayer (13), as
it is showed in the first picture on the right.
Then turn the sprayer 90º to the right to fix
it. The arrow will be lined up with the side
line of the product, as it is showed in the
second picture on the right.
To remove it, act in inverse sense.
The process to insert the flexible hose is
the same. It also has the same mark than
the long sprayer showed in the pictures.
Round brushed or bend sprayer installation
You can put the round brushed (5) or the bended (6) sprayer in the fixed nozzle (13)
or in the long sprayer (11). These both sprayers can be installed facing 6 different
directions. Because of that, please choose first the desired direction and insert one of
them firmly. If you want to use the long sprayer (11) you should install the round
brushed or the bended nozzle before, and then insert the long one in the fixed
nozzle according to the previous instructions.
20