Publicidad
Idiomas disponibles
Idiomas disponibles
[]TV
Screen Display
Mode
2 typesof display modes can be selectedin the digitalmodewhen the
broadcastingstation is sending16:9video signal.
1
Press [MENU]
to display the main menu.
@
2
Use [CH A/V]
to select"DTV
SETUP", then press
[VOL _l.
e.g.) digital TV mode
- TVSETUP -
PECTURE
CHANNEL SETUP
V-CHFPSETUP
LANGUAGE
[ENGLISH]
CAPTEON
[OFF]
DTV SETUP
or
Use [CH A/V]
to select "DTV DISPLAY", then use
[VOL _/]
to switch the desired TV aspect ratio.
or
- DWSETUP
-
DTV DISPLAY [LETTERBOX]
DTVCC
or
LETTERBOX
ZOOM
[LETTERBOX]
Display the digital-supported
program
in full-screen.
Black borders will spread in the upper and lower
screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported
program.
The right and left side of image will be cut off.
Press [MENU]
to exit.
Note:
• Youmay notswitch the display mode depending on the
program.
[] Sleep Timer
Thesleeptimer canbeset toautomatically turnoffthe unit afteran
incremental p eriodoftime.
1
Press [SLEEP] to set the sleep timer.
SLEEP
SLEEP OFF
• Sleep timer display appears on theTV screen.
Press [SLEEP] repeatedly
to change the amount
of
time until shut off.
SLEEP
SLEEP 120 MIN
• You can set the unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each press of [SLEEP] will increase the time by 30
minutes.
• After set up, the sleep timer display can be called up
for checking
by pressing
[SLEEP].
To Cancel the Sleep Timer
Press [SLEEP] repeatedly
until "SLEEP OFF" is displayed
on the TV screen.
No te:
• Thesleep timer setting display will automatically disappear
in a few seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
EN
Publicidad
