GreenWorks Pro 5113902VT Manual Del Operador página 8

SYM- SIGNAL
BOL
CAUTION
3 INSTALLATION
3.1 ELECTRICAL CONNECTION
This machine has a precisely built electrical motor.
It should be connected to a power supply that is
120V, 60 Hz, AC only (household). Do not operate this
machine on direct current (DC). A considerable voltage
drop will cause a loss of power and the motor will be
overheated.
3.1.1 PREPARE A DRIP LOOP
Recommend the use of a drip loop as below so the
water can not run along the power cord even possibly
reach the electrical outlet and plug.
7
WARNING
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are
working with a power tool. Failure to do so can result
in serious personal injury.
3.2 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
English
MEANING
(Without Safety Alert
Symbol) Indicates a situa-
tion that may result in
property damage.
14
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
3.3 INSTALL THE UPPER PANEL
2 2
23
1. Align the screw sleeves of the front panel (2) with
the screw holes on the upper handle (23).
2. Tighten them with a Phillips screwdriver (not
included).
3.4 INSTALL THE SPRAY GUN HOLDER
3
1. Align the screw sleeves of the spray gun holder
(3) with the screw holes on the upper handle.
2. Tighten them with a Phillips screwdriver (not
included).
7
EN