JBM 54514 Manual De Instrucciones página 4

EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
Manual oil and fluid extractor with a 6.5-liter
capacity for efficient and safe extraction. De-
signed to facilitate liquid transfer and contri-
bute to environmental protection.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before
using the product.
Failure to comply with these ins-
tructions could result in personal
injury and/or damage
to the product.
Please keep the instructions for
future reference.
• Comply with health and safety regulations,
local guidelines, and workshop practices when
using the equipment.
• Understand the applications and limitations
of the extractor, as well as the specific risks as-
sociated.
• Keep the extractor in good condition throu-
gh authorized services and replace dama-
ged parts with genuine ones to preserve the
warranty.
• Use the equipment exclusively for extracting
non-corrosive oils and for water transfer.
• Use eye protection and safety clothing, keep
the work area clean and well-lit, and ensure
proper balance and support.
• Avoid storing liquids in the container, empty it
immediately after use, and do not use the ex-
tractor for prohibited substances, which would
invalidate the warranty. Additionally, do not
dismantle or adapt the unit for other purposes,
check for damage, and store in a safe and dry
place.
ESPECIFICACIONES TÉCNICAS
Capacity
Air inlet
Working tempera-
ture
Working pressure
range
PARTS LIST ASSEMBLY
OPERATION
STEP 1: WARM THE ENGINE AND INSERT THE
TUBING
Allow the engine to warm up for five minutes
before extracting the motor oil for a consis-
tent texture. Remove the measuring stick if you
choose to access the oil through the dipstick
tube (figure 1A). Choose the appropriate ex-
tension tubing and ensure it touches the bo-
ttom of the reservoir with the oil you want to
extract (figure 1B).
STEP 2: MAKE ALL CONNECTIONS
Stabilize the unit on a flat surface.
Lift and twist the pump handle to access the
unit's cap hole.
Connect the main extraction tube to the unit,
securing it in place.
Connect the extension tubing to the main
tube, securing it firmly.
· 4 ·
REF.54514
6.5 liters (1.7 gallons)
1/4"
2°C-80°C
(35°F-175°F)
40-170 psi