Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions
EN
1.
Plates
2.
Power ON/OFF key
3.
Temperature control buttons
4.
Power cord
Operation
1.
Plug your Corioliss styler into the power supply.
2.
Press the ON/OFF button. The styler comes on by default at 190°C and the light starts to
blink.
3.
To reduce or increase the temperature press the buttons with arrows located inside the
styler. When it reaches the required temperatura the light will stay. Each temperature range
has got a different color.
4.
Press the ON/OFF button to turn OFF your styler. Once is OFF, unplug your Corioliss from
the power supply and let it cool down in a safety place.
This tool is not only attractive to you but also to your children. Please ensure
you always store it out of reach of children particularly during use, especially
when cooling.
Failure to operate
In the unlikely event that your Corioliss product does not operate correctly, check that the
Corioliss product and mains power supply are switched on, and that power is available.
Your Corioliss styler is a product designed to work at a high level. If while using it the device
has gone through strong variations in the electrical power supply, can go into security mode
to prevent possible damage.
Therefore, in the unlikely event that your Corioliss product does not operate correctly,
check that the Corioliss product and mains power supply are switched on and that power is
available. If the product stops working, follow these steps:
1.
Turn off the styler.
2.
Unplug the styler from the main power supply.
3.
Wait for a few seconds and plug the device again into the main power supply.
4.
Turn on the styler.
5.
In the case of any repeated faults or problems, please contact Corioliss Service Center.
6
User maintenance instructions
CLEANING
1.
Unplug your Corioliss styler from the mains power supply.
2.
Always allow the Corioliss styler to cool before attempting to clean it.
3.
Never immerse the appliance in water.
4.
Wipe the outside and the plates with a damp cloth. Do not use sharp or abrasive detergents
or corrosive products.
5.
Do not use hair products that could leave residues on the plates.
STORAGE
1.
Always allow the Corioliss styler to cool down before storing away.
2.
When the Corioliss styler has cooled down, fold the power cord in the same way as it was
first delivered in its packaging. Do not wrap the supply cord around the Corioliss styler as
this can strain the cord and cause premature supply cord failure.
Contact details
Corioliss Europe S.L.
Polígono Industrial El Rubial Calle 1 Pacela 10
03400 Villena – Alicante
Spain
+34 96 581 78 28
info@corioliss.es
www.corioliss.com
Made in RPC
EN
7
Publicidad
