Descargar Imprimir esta página

KSIX BLUEX08 Manual Usuario página 2

Auricular manos libres executive
Ocultar thumbs Ver también para BLUEX08:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 4
Play/Pause
Volume -/+
Previous/Next
song
Answer/Hang
up calls
Reject calls
Call last
number called
2.4 How to disconnect/reset the handsfree
To disconnect the handsfree earset from the phone (for
example, to connect your phone to another Bluetooth
device), choose one of the following instructions:
- Turn off the earset.
- Use the phone's Bluetooth function to disconnect the
handsfree from the phone.
- Move the earset 10M away from the phone.
2.5 Charging the handsfree
Before using the earset for the first time, we recommend to
fully charge it.
When charging, the indicator light is red, the battery will be
full when the red light goes off.
If the light flash once every 20 seconds it's a reminder of low
battery.
Troubleshooting: If the handsfree LED indicator does not
turn on during its charge, it should be due to a power supply
issue. Check both ends of the cable, as well as the power
supply state and the device you are using to charge,
whether it is a wall charger, a powerbank or a PC port.
2.6 Connect two phones
First of all, disconnect the handsfree from the paired phone,
without forgetting the connection or removing the pairing.
Then, the earset will automatically go back to pairing status.
After that, search "BLUEX08" or "KSIX EXECUTIVE" with
another phone. Once paired with the second phone,
connect the handsfree earset again to the first phone.
Connect or disconnect each phone to the handsfree
depending on which one you will need to use.
Note: In case the device is not making any sound, make sure
the earset is activated and fully charged, paired with your
phone, your Bluetooth connection is enabled and that you
are within 10m from the phone. If having checked all of this,
it still does not work, try the following:
- Re-charge the earset
- Restart the phone
- Start the phone Bluetooth and delete the previous pairing
history
- Re-match the earset with the phone
3. Maintenance recommendations
• Regularly clean the product with a dry cloth. The product
must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc.
to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or
bend it too strong.
• If the product includes a cable do not bend it too strong
and do not pull from it to unplug the product.
Click the multifunction button
once to play or pause the music.
Click (+) button to increase the
volume. Click (-) button to
decrease the volume.
Long press (-) button for 3
seconds to go to the previous
song. Long press (+) button for 3
seconds to go to the next song.
Click the multifunction button
to answer the call or hang up
the call.
Long press the multifunction
button.
Double-click the multi-function
key.

Publicidad

loading