Palit NVIDIA GeForce GTX 600 Serie Guía De Instalación Rápida página 16

(D PALIT" | Graphics Card Utility Introduction
In order to adjust the "Graphics clock", Memory clock", "Core Voltage" and "Power Limit", please draw the slider bars to
over-clocking the board
You can change both the core clock and/or the memory clock settings independently. The higher the clock settings, the
faster your graphics card will work
For the GTX 600 series (and above), increase "Power Limit" will increase the performance as well
Please note that not every board can be over-clocked too much, there will be different limitation to over-clocking.
USER MODE
"USER MODE" is used for user to preset up to 5 different modes for different operation condition. After carefully adjusting
the fan's duty, core speed and memory speed, press "SAVE" bottom and then press one of those five buttons to save
one of your favorite modes. To select the user mode, you just press the number of the mode you save.
BIOS LOADING
This function is for users to load the VGA bios and save in the system for future usage.
Just press "BIOS" bottom to start:
SaVBIOS
O Save VGA BIOS to file!
Then, system will ask you the file name to save file BIOS file.
Waling...22%
You just enter the file name then system start copying the BIOS to the fil.
Please wait
It will take within one minute to copy the BIOS file.
Es)
Saved VGA RIOS to CÄUGAFIOS.mm
done!
a]
28 29