Publicidad
Enlaces rápidos
REPLACEMENT STYLI:
MODEL SS39ED (CARTRIDGE MODEL SC39ED); MODEL SS39EJ (CARTRIDGE
z
MODEL SC39EJ); MODEL SS39B (CARTRIDGE MODEL SC39B)
SPECIFICATIONS
5
D
I 7
Frequency Response
. . . . . . . .
Output (1 kHz, 5 cm/sec peak
recorded velocity)*
. . . . . . . .
Channel Balance
. . . . . . . . . . .
Channel Separation
. . . . . . . . .
(minimum)
Tracking Force**
. . . . . . . . . . .
Trackability (cm/sec.
. . . . . . . .
peak recorded velocity)
Grip Color
. . . . . . . . . . . . . . . . .
Tip Dimensions
. . . . . . . . . . . . .
Net Weight
. . . . . . . . . . . . . . . . .
*Output voltage given for stereo cut record. For MONO cut record, output voltage at both left channel and right
channel cartridge terminals will be
71%
of figures above.
"Tracking
forces greater than maximum indicated should not be used.
~~
-
STYLUS REMOVAL AND REPLACEMENT
DynetiP stylus is precision manufactured by
Shure Brothers Inc." AVOID INFERIOR IMITA-
TIONS. THEY WILL SERIOUSLY DEGRADE
THE PERFORMANCE OF YOUR CARTRIDGE.
ALL GENUINE DYNETICa STYLI ARE MANU-
FACTURED BY SHURE BROTHERS INC. LOOK
FOR THE NAME SHURE ON THE STYLUS
GRIP.
FULL ONE-YEAR WARRANTY
FIGURE 1
Shure Brothers Incorporated ("Shure"), 222
Exercise care so your fingers don't slip and
Hartrey Avenue, Evanston, Illinois 60204, war-
damage the stylus tip or shank.
rants to the owner of this product that it will
OPERATION
be free, in normal use, of any defects in work-
The stylus guard is moved between the protec-
manship and materials
a period
Of One
year
tive position and the play position by the white
from date of purchase. You should retain proof
lever. DO NOT PUSH THE GUARD UP OR
of date of purchase. Shure is not liable for any
DOWN.
TO
raise the stylus guard to the play-
consequential damages. If this Shure product
ing position, slide the white lever horizontally
has any defects as described above, carefully
toward the center of the cartridge. Use the v-
repack the unit and return it prepaid
shaped cutout in the lever to guide cuing set-
Shure Brothers Incorporated
down.
Attention: Service Department
CLEANING
1501 West Shure Drive
Use the brush supplied with the cartridge. Al-
Arlington Heights, Illinois 60004
ways brush the stylus from back to front; never
If you are not in the United States, return
brush or wipe the stylus from front to back
the unit to your dealer or Authorized Service
or side to side. An alcohol or alcohol-distilled
Center for repair. The unit will be repaired or
water solution can be used as a cleaning agent.
replaced and returned to you promptly, and
Commercial cleaning solutions may cause
if it cannot be repaired or replaced, you may
stylus damage or corrosion.
elect to receive a refund. This warranty does
SPECIAL NOTE
not include stylus wear.
To maintain the original performance stand-
PATENT NOTICE
ards of your cartridge, be certain that any
Manufactured under one or more of the follow-
replacement stylus you buy bears the following
ing U.S. Patents 3,055,988, 3,077,521, 3,077,522
certification on the package: "This Stereo
and 3,463,889.
Copyright 1979, Shure Brothers Inc.
(OVER)
Printed in
U.S.A.
27A1470 (SG)
SS39ED
20 to 20,000 Hz
4.0 mV
Within 2 dB
25 dB at 1 kHz
V . 4
to 1
Y 2
grams
400 Hz-24 cm/sec
1,000 Hz-35 cm/sec
5,000 Hz-33 cm/sec
10,000 Hz-25 cm/sec
at 1 gram
Orange
5 x 18p (.0002 x
.0007 in.) nude,
biradial (ellip-
tical)
I gram
SS39EJ
20 to 20,000 Hz
4.0 mV
Within 2 dB
20 dB at 1 kHz
11/2 to 3 grams
400 Hz-30 cm/sec
1,000 Hz-40 cm/sec
5,000 Hz-45 cm/sec
10,000 Hz-35 cm/sec
at 2 grams
Light Green
l o x 18p(.0004x
.0007 in.)
biradial (ellip-
tical)
1 gram
SS39B
20 to 20,000 Hz
4.0 mV
Within 2 dB
20 dB at 1 kHz
1Y2 to3grams
400 Hz-30 cm/sec
1,000 Hz-40 cm/sec
5,000 Hz-45 cm/sec
10,000 Hz-35 cm/sec
at 2 grams
Beige
18p (.0007 in.)
spherical
I gram
Publicidad
