Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting the fascia doors
English
Fig. 1 - Fitting the door decorative bracket
Remove the white decorative cover (Fig. 8) by lifting it upwards.
Take the following measurements:
Fig. 1
Measurement B = Measurement from the bottom surface of the
kitchen unit to the bottom of the fixing bracket.
Measurement C = Measurement from the bottom surface of the
kitchen unit to the top of the door of the adjacent unit.
Unscrew and remove the nuts and washers from the top of the
product door to remove the bracket.
Fig. 2
Fig. 3 - Fitting the decorative door bracket.
1
Remove C from B and fit the fixing bracket (2) using this me-
asurement for the vertical position and place it in the centre
2
for the horizontal position. Secure the fixing bracket (2) with
screws(1).
Fig. 4 - Fitting the decorative door.
Fig. 3
Place the decorative door on the product door by inserting the
adjustment screws into the slots of the fixing bracket.
Locate the washers and screw the nuts onto the adjusting
screws.
Fig. 5 - Aligning the decorative door
Close the door and check its alignment with the other doors in
the assembly.
Fig. 4
Adjust the decorative door by screwing or unscrewing the ad-
justing screws for vertical adjustment and with the help (Fig.
5) of the slots in the fixing bracket for other directions. Fix the
10
screws in place as shown in Fig. 5.
8
Fitting the decorative door base fixings
Fig. 5
With the product door open, locate the metal decorative door base
fixing brackets and screw the fixings to the decorative door. These brackets may need to be removed
and refitted depending on the decorative door used.
Fitting the decorative door
Replace the decorative door, which you removed in the first step, in the corresponding fixing bracket.
Check that the entire door assembly is working properly and that the refrigerator door seal is still sealing.
Important: After installation is complete, check that the product is securely fastened inside the unit and
that the door(s) close and open properly. If the door seals do not offer resistance when opened, it is likely
that the product and/or decorative doors are not properly fitted.
36
infiniton.es
Publicidad
