Peavey SMR 6 Guía De Operación página 4

1800 rase 14 Me 13 Mes mes 12 mon woe 12 we
SE
Pao 15
MICROPHONE INPUT (1-4) (12)
For use with low impedance microphones or low level sources. Also has phantom power capability.
MIC/LINE INPUT (5, 6) (13)
For use with high impedance microphones or high level sources. This input has no phantom power capability.
MASTER OUTPUT (14)
A transformer balanced output used to drive an external power amplifier.
AUX OUTPUT (15)
An unbalanced output used to drive an external power amplifier.
PHANTOM POWER SWITCH (16)
Selects phantom power for channels 1-4. In the "off" position, no phantom power is available on any channels.
Phantom power is 22 volts when using the AC line cord. If the unit is operated from an external DC power
source (+12 volts - +28 volts), the phantom power voltage is 3 volts below the DC source input.
DC INPUT (17)
This unit may be operated from a DC power source. This DC power source must provide a minimum of 12
V DC and not more than 28 V DC. It must provide at least 06 AMP and be negative ground.
LINE CORD (120 V PRODUCTS ONLY) (18)
For your safety, we have incorporated a 3-wire line (mains) cable with proper grounding facilities. It is not
advisable to remove the ground pin under any circumstances, If it is necessary to use the equipment without
proper grounding facilities, suitable grounding adaptors should be used. Less noise and greatly reduced shock
hazard exists when the unit is operated with the proper grounded receptacles.