Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
R M
2 6 0 4
Keep Working
• Use a line and pipe detector to locate these on the walls with water or gas pipes and hidden power lines. Avoid touching live
components or conductors.
• Use ear mufflers to protect your ears. Hearing loss can be a gradual process!
• Do not use this tool in areas where there are flammable vapors or liquids.
• Always disconnect the plug from the power outlet before cleaning or making changes to the tool.
• Protect the power cord from damage. Oil and acid can damage the cable.
• Do not overload the machine. Sufficiently secure all parts that are working.
• Important! All national safety regulations related to the installation must be complied with. Use and maintenance.
• Chisel and brill bits can accidentally jump off the machine and cause serious injuries.
• Before starting work, always check that the tip of the Chisel and brill bits or hole is correctly locked in the mandrel.
• Regularly inspect the chuck for signs of wear or damage.
• Never operate the rotary hammer before resting it on the work piece (wall, ceiling, etc.).
• Once you have drilled, disconnect the hammer drill from the power outlet and remove the drill tip from the machine.
• Always disconnect the rotary ammer from the power outlet before changing a drill point.
• Protect your eyes and other workers against leaking particles and chips. wear a helmet! Install partition walls!
• Useful work gloves to protect your fingers from scratches and bruises. Vibrations can cause injuries to the arm and hand system.
Keep exposure to vibrations as little as possible.
• Always place the power cord back of the machine. Store the machine in a place inaccessible to children.
• When performing work, always hold the machine with both hands and make sure it is in a stable standing position.
KEEP WORKiNG
08
Publicidad
