Manuales relacionados para Truper COMP-50Q
Resumen de contenidos para Truper COMP-50Q
- Página 1 Manual Quiet air 800 kPa compressor (116 PSI) Pressure Applies for: Codes Models 102958 COMP-25Q 102959 COMP-50Q COMP-50Q COMP-25Q Read this manual thoroughly CAUTION before using the tool.
- Página 2 Parts Assembly Keep this manual for future references. Start up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Troubleshooting Notes Authorized service centers Warranty policy COMP-50Q COMP-25Q ENGLISH...
- Página 3 Technical Data COMP-25Q COMP-50Q Code 102958 102959 Description Quiet air compressor Voltage 127 V Power Working: 1 Hp Starting: 2 Hp Frequency 60 Hz Maximum Pressure 116 PSI Air Flow 3.8 CFM @ 40 PSI 2.5 CFM @ 90 PSI...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instruction listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Pneumatic Compressors Before using the compressor When using the compressor CAUTION CAUTION • The pressurestat produces sparks when • Do not aim nozzles, sprayers or the air working. If sparks make contact with gasoline vapors or jet towards people or animals. WARNING other solvents they can ignite causing fire or explosion.
- Página 6 Parts Out pressure Switch filter regulator Air Outlet Valve (Quick Connection) Regulated pressure gauge outlet Regulated Pressure Gauge Check valve Tank Transportation Pressurestat Induction handle motor Pressure release valve Moisture separator filter Front Drain supports valve ENGLISH...
- Página 7 Assembly • The air compressor is used to supply energy to pneumatic tools as versatile as power tools are. The tools can be used to drill, screw, hammer, rivet, staple, chisel, polish, blowtorching, cleaning, painting etc. • The compressor functions are completely automatic and controlled with the pressurestat. It stops the motor when the tank’s pressure has reached the maximum level.
- Página 8 Start Up Switch ON and OFF Operation • Before operating the compressor set it onto a flat, • Connect one end of the air hose into any of the leveled and solid surface, well ventilated and away from compressors outlets (H). flammable objects like curtains, etc.
- Página 9 Maintenance Cleaning and Care • Always keep the ventilation slots clean and free of obstruction to guarantee the proper motor cooling. • Inspect regularly all the mounting screws and double check the screws are tight. If any of the screws is loose tighten immediately. •...
- Página 10 Troubleshooting Problem Cause Solution The motor is not • No power. • Be sure the cable is connected. Check the fuse-circuit switch. working. • Fuse is blown . • Replace the blown fuse. • Thermal fuse is • Press the thermal switch button to restart. activated.
- Página 11 Notes ENGLISH...
- Página 12 Notes ENGLISH...
- Página 13 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800-018-7873 to get information about the nearest Service Center.
- Página 14 It includes the costs of transportation of the product that derive from its fulfillment of its service network. Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.