Descargar Imprimir esta página

Gluckstein Elements 39646-HBC Guía De Uso Y Mantenimiento página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
1
Installing the mounting plate
WARNING: Turn off the power at the main fuse box.
Install the mounting plate (EE) to the junction box
(not included) with the supplied outlet box screws (BB).
The support cable (FF) is provided to support the
weight of the fixture while wiring. Attach the end of
support cable (FF) into a slot located on mounting plate
(EE). Carefully allow the support cable (FF) to support
the weight of the fixture while wiring.
2
EE
BB
EE
FF
HOMEDEPOT.CA / HOMEDEPOT.COM / GLUCKSTEINELEMENT.COM
5
Making the electrical connections
NOTE: Always use wire nuts (AA) to connect wires and
push all excess wires and connections back into the
junction box (not included).
Wrap the ground wire from the fixture around the ground
screw (CC) on the mounting plate (EE), and then connect the
ground wire from the fixture to the ground wire from the
junction box.
Connect the black wire of the power supply (not included) to
the black wire of the fixture (included) and connect the white
wire of the power supply (not included) to the white wire of
the fixture (included).
Connect the fixture wires as follows:
WHITE WIRE
FROM HOUSE
BLACK WIRE
FROM HOUSE
GROUND WIRE
FROM HOUSE
Please contact 1-833-695-2045 for further assistance.
CC
EE
AA
WHITE WIRE
FROM FIXTURE
BLACK WIRE
FROM FIXTURE
GROUND WIRE
FROM FIXTURE

Publicidad

loading

Este manual también es adecuado para:

1001 657 7251006 864 075