Defiant 925905 Manual De Instrucciones página 4

fixture on the wall. (FIG.2)
Step Step Step 4 4 4 4
Step
Connect the light fixture (2) to the
solar panel (1). (FIG.3)
Setting Setting up up up or or or or making making
Setting Setting up
1.The lights will turn off in daytime and turn on at night, which is
controlled by a CDS switch automatically.
2.Observe two controls after removing the compartment cover.
The RANGE (sensor sensitivity) control is located above. The
ON-TIME (duration) switch is located below.
3.Set the sensitivity of the sensor. It has a 30 second warm up
period before it will detect motion. Turn the dial clockwise to
increase the sensitivity (range). Turn the dial counter-clockwise
to decrease the sensitivity (range).
4.Slide the ON-TIME switch to set how long the light will stay on
after motion is detected. The range is controlled by dial and
varies with surrounding temperature. The setting choices are 1
and 5 minutes. Note: When making this adjustment in TEST
mode, the light will remain ON for 5 seconds and then turn OFF
both in bright or dark environments.
making adjustments to to to to the adjustments adjustments
making adjustments
(2)
the the
the motion
FIG.4
4
(1)
FIG.3
motion motion sensor sensor: : : : sensor
motion sensor