GOAL ZERO PRO 4000 Manual De Instrucciones página 4

Wood or Metal
We recommend using a 6mm or ¼" x 20 toggle bolt with washer.
*It is the responsibility of the installer to determine hardware
quantity, length, and type to meet the needs of the specific
mounting application.
**It is also the responsibility of the installer to ensure that proper
tools, personal protective equipment, and safe practices are
implemented to ensure the safety of the installer and the quality of
the installation.
4
TOGGLE BOLT
WITH WASHER
Installation
1. Choose a spot for your Yeti PRO 4000 and mounting plate.
If you plan to expand your system in the future with a second
Yeti PRO 4000, leave enough space for an additional mounting
plate next to the spot you choose.
2. Mark mounting hole locations that will be drilled out to support
installation of hardware.
3. Install the mounting plate in a direction that allows the latches
to be opened and closed.
4. Insert your bolts and tighten until secure. Use at least 4 bolts
for home installations.
5. Attach the Yeti PRO 4000 to the mounting plate and secure
with the locking latch by inserting the key into the lock cylinder
and turning the key clockwise, bringing the locking arm into the
locked position. See illustration on page 6.
6. If installing in an RV or van, be sure the unit is secure before
transporting.
5