Publicidad
Idiomas disponibles
Idiomas disponibles
ving, we suggest that you press the ON/OFF button (5) again to turn
off the shaver. Change the head (7) to (4) and you can immediately
attach the protective cover (1) to avoid any damage.
5. Cleaning indicator LED (6)
The faucet symbol indicates that the shaver can be washed and
cleaned with water. When it is continuously on, it is a reminder to
clean the appliance.
6. Travel-lock indicator LED (6)
You can lock the shaver when you're traveling to make sure it
doesn't accidentally turn on. If you want to enable travel-lock,
press the ON/OFF button (5) for three seconds. When the tra-
vel-lock is enabled, the lock symbol flashes on the shaver. If you
want to disable travel-lock, press the ON/OFF button (5) again for
three seconds. First, the lock symbol will flash, and then disappear
to indicate that the shaver is ready to be used again.
MAINTENANCE AND CLEANING
For convenience and better shaving results, we recommend that
you clean the product regularly after use. Cleaning the product re-
gularly will keep it in good condition, avoiding bad odors or bacte-
ria, and maintaining the good results of shaving.
1. Make sure the product is completely turned off before cleaning.
2. Press the release button (4) to open the shaving head (3).
3. Rinse the shaving head (3) and hair storage compartment directly with
water. For a deep cleaning, remove the shaving unit by pulling it out.
4. Then turn the lock counterclockwise 1 by pulling upwards, 2 to
unlock and remove the retaining frame.
5. Next, remove and clean one set of blades at a time.
6. Separate the blade and ring, and clean both parts under water or
21
Publicidad
