Style selections 51540 Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
4. Align the holes at the bottom of the burner (C) to
the holes at the top of tank housing (D); ensure that
the control panel on the burner (C) is aligned with the
door on the tank housing (D). Attach the burner (C)
to the top of tank housing (D) using 4 M5 x 12 screws
(DD) and 4 M5 nuts (EE). Be sure to fully tighten.
Hardware Used
M5 x 12 Screw
DD
M5 Nut
EE
5. Remove the preassembled M5 screws from the
upper supporters (I). Slide the 3 upper supporters
into the slots at the top of the burner (C). Once
fully inserted, secure the upper supporters into
the burner by replacing the M5 screws that were
removed at the beginning of this step.
Note: Be sure that the hooks on the upper
supporters (I) are facing upwards.
6. Remove the 3 preassembled screws from the top
of the burner (C). Attach the glass tube ring (B)
to the top of the burner (C) using the 3 screws
removed at the beginning of this step. Be sure to
fully tighten.
4
C
DD
x 4
EE
x 4
D
5
6
8
I
C
B
C