Glacier bay F51A1074CP Guía De Uso Y Cuidado página 5

Installation (continued)
4
Installing the drain body
Remove the drain ange (D) from the drain
body (G).
Apply silicone caulk (not included) under the
drain ange (D) and place the drain ange (D)
over the drain hole in the sink.
From underneath the sink, screw the drain
body (G) onto the drain ange (D). Ensure that
the opening (1) for the ball rod on the drain
body (G) faces towards the rear of the sink.
Tighten the rubber washer (E) and lock nut (F)
on the drain body (G).
E
6
Installing the lift rod
Insert the lift rod (I) through the faucet (A) and
down into the strap (K). Tighten the thumb
screw (J).
5
D
G
F
1
5
Please contact 1-855-434-5224 for further assistance.
Installing the plunger and ball
rod
Insert the plunger (H) into the drain hole in the
sink.
Remove the lift rod strap (K) and spring clip (L)
from the ball rod (M).
Install the ball rod (M) into the drain body (G)
and through the hole of the plunger (H).
Push the bushing (O) and ball nut (N) against
the hole in the drain body (G) and tighten the
ball nut (N) onto the threaded end.
H
H
1
M
M
G
I
A
N
1
O
1
I
K
J
HOMEDEPOT.com