Sharp PS-990 Operación Manual página 10

System connections
AC connection
■
Please ensure that the voltage marked on the rating
label, located on the rear panel, is the same as the
voltage in your area. Insert the end of the power
lead into the AC IN socket on the back of the unit.
Plug the other end of the cable into the wall socket.
AC outlet
(AC 100 - 240V
~50/60 Hz)
CAUTION:
TO PREVENT ELECTRIC
SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
PS990_IM_EN.indd 9 PS990_IM_EN.indd 9
General control
To turn the power on or off
■
● Press the /FUNCTION to power ON.
● Press and hold the
power OFF.
Notes
®
In USB/Bluetooth /LINE IN mode, when no operation is
performed for 15 minutes, the unit will automatically
enter standby mode. To resume operation, press
the /FUNCTION.
Setting the function mode
■
To change the function, press the
button to select the USB /Bluetooth
Volume control
■
Rotate the VOLUME knob to increase or decrease
the volume.
Current volume level will be shown on the display.
Lighting mode
■
Press the LIGHT button repeatedly to select the
different lighting mode of LED indicator light on
the speaker. The display shows LEd1 to LEd7 and
LEd0 (Light OFF).
● "LEd1" Slow moving and slow color change
● "LEd2" Fast moving sync with the music and
slow color change
● "LEd3" Rainbow color sync with the music
● "LEd4" Circle light breathe and color change
sync with the music
● "LEd5" RGB color blinking Circle light sync with
the music
● "LEd6" One color blink with music and color
change
● "LEd7" White color blink
● "LEd0" Light OFF
Bass and treble level control
■
● Rotate the TREBLE knob to adjust the treble.
● Rotate the BASS knob to adjust the bass.
SUPER BASS function
■
Press SUPER BASS button to switch the bass
mode on/off. The "B-ON" will be shown on the
display when the bass is switched on and "B-OF"
will be shown when off.
E-9
/FUNCTION 3 seconds to
/FUNCTION
®
/LINE IN function.
7/11/23 12:42 PM 7/11/23 12:42 PM