Tank Filling - Vaporti VAIO 80 TC Guía De Inicio

ATOMIZER PRIMING
Before using the VAIO 80w TC mod, there is a very cost saving
measure that all users should take. That is priming the atomizer.
Unscrew the top cap from the device, then proceed to unscrew
the pre-installed 0.25ohm notch atomizer from that top cap. Once
removed, take your e-liquid of choice and proceed to drip 3-5 drops
of e-liquid into the atomizer head. Reattach atomizer to the top cap
and proceed to fill your tank with your e-liquid.

TANK FILLING

After priming your atomizer and setting it aside, you are now ready
to fill your tank. Take your e-liquid and proceed to fill the tank.
Once you have filled the tank, screw the top cap back onto the