Bergstrom EVER Guía Rápida página 13

To reconfigure the temperature scale type, simply press the MODE and CLOCK buttons on the
control panel at the same time for a few seconds with the unit turned off to return to the settings.
This must be reset by fully disconnecting it from the power source in order to change battery type
selection for the unit.
Note: This settings menu can also be used to remove warning
alert from the control panel.
CONTROL PANEL OPERATION
6 7
1
ON/OFF: Cooler unit On/Off button. Pressing once turns the unit on and leaves it ready for
operation. The unit goes off when pressed with the cooler on.
Pressing and holding the On/Off button turns the LED on at maximum brightness; holding
it down gradually decreases brightness by approximately 20% every half second; and
releasing the button will maintain the same brightness as the LED.
2
MODE: Select the unit's operation mode from between AUTO, MANUAL and FAN.
Operation modes:
- AUTO: Automatic operation: Allows flow temperature to be selected between 18 and
27 ºC (64.4 - 77 ºF). The user can select unit operation from 8 different blower speeds.
While the unit is running in automatic mode, the display will switch between showing
blower speed and supply air temperature every 5 seconds.
- MANUAL: Manual operation: The user can select from 8 different blower speeds with the
cooler operating at maximum capacity. The display will only show the selected blower
speed while the unit is running in manual mode.
- FAN: Fan function: Allows blower speed to be selected from 8 speeds. In this operation
mode, the cooler will only supply ambient temperature air.
8 11 9
1 2 3
QUICK GUIDE
- Humidity filter replacement
10 12
4 5
EVER EN
13
TU ESPACIO DE VIDA CONFORTABLE
13