Publicidad
Idiomas disponibles
Idiomas disponibles
1. Place the filter you want to use in the filter holder arm, then put the
2. Then, with the flat part of the tamper spoon, press the coffee from the
3. Insert the filter holder arm into the coffee maker and
close it firmly until you reach the locking point.
4. Then place the coffee cup on the cup rest tray, press
the power button
remain on.
5. Prepare hot coffee.
• Press the espresso button
the heating system.
• When the indicator light stays on, the internal components have warmed up and are
ready to brew coffee.
• Press the espresso button again
reach the desired coffee volume, press the espresso button again
maker. (The longest coffee is 60 seconds).
• Press the power button
6. Prepare cold coffee.
• Press the cold brew button
• When you reach the desired volume, press the cold brew button again
fee will stop (the maximum coffee duration is 60 seconds).
• It is recommended to use cold water to obtain a better flavor.
ADVICE:
• Whenever you make hot coffee first and then cold coffee, place a large cup under the
hot water spout.
• Turn on the steam selector, hot water and steam will come out of the machine.
• When the hot water from the steam nozzle forms a straight line, turn off the steam selector.
• Put cold water in the water tank and your machine is ready to brew cold brew coffee.
BREW ESPRESSO
ground coffee powder in the filter (the coffee powder should be No. 1,
neither too coarse nor too fine).
filter and clean the coffee powder from the edge of the filter with a
brush or a dry cloth.
and all the indicator lights will
and the indicator light will flash. The machine will start
so that the coffee starts to come out. When you
and the coffee maker will remain in standby mode.
once for the coffee to start coming out.
.
to stop the coffee
and the cof-
E NGLI SH
9
Publicidad
